Asphalt Milling in Saint Joseph, MO
Professional asphalt milling to prep your Saint Joseph, MO parking lot for a brand-new overlay.
When does a Saint Joseph parking lot need asphalt milling?
Milling removes the top layer of deteriorated asphalt using a cold planing machine, leaving the base course intact and ready for a fresh overlay. In Saint Joseph, we see milling needed most often on lots that have been patched repeatedly, where multiple asphalt layers have built up over the decades, or where the surface has developed severe rutting from heavy traffic near The Belt Highway Corridor and Frederick Avenue Retail. Milling is also required when you need to match curb heights, maintain drainage grades, or meet ADA slope requirements at lot entrances.
How does the milling process work in Saint Joseph?
Our milling machine grinds the asphalt surface to a precise depth — usually 1.5 to 3 inches depending on what the lot needs. The millings are loaded directly into dump trucks and hauled off or recycled. Along busy corridors like Frederick Ave and I-29 in Saint Joseph, we phase the work so your lot stays partially accessible during milling. Once the surface is milled, we sweep and inspect the exposed base before any new asphalt goes down. This step is critical because it reveals hidden base failures that would wreck a new overlay if left unaddressed.
Why use Platinum Paving for milling in Saint Joseph?
Milling requires heavy equipment, an experienced operator, and the judgment to know how deep to go without damaging the base. With 60+ years of combined experience and 530+ projects across the KC metro, Platinum Paving has the crew and the gear to handle any milling job in Saint Joseph, MO. We own our equipment — no renting, no waiting on availability — which keeps your project on schedule. Joe Brogoto, our owner, personally reviews every milling plan before we start. Call (913) 701-6044 for your free estimate.
Why Saint Joseph Trusts Platinum Paving
Owner-Led Accountability
Joe Brogoto personally reviews every Saint Joseph project — from the first estimate to the final walkthrough. You deal directly with the owner, not a revolving door of salespeople.
One Contractor, Every Service
Platinum Paving handles paving, milling, patching, sealcoating, and striping — so Saint Joseph property managers make one call instead of coordinating three contractors.
530+ Projects Completed
Our track record across the KC metro speaks for itself. From Saint Joseph, MO to every corner of the service area, property managers keep calling back because we deliver on time and on budget.
1-Year Warranty
Every project comes with a 1-year warranty on workmanship and materials. If something is not right, we come back and make it right — no arguments, no fine print.
Signs Your Saint Joseph Lot Needs Asphalt Milling
Asphalt too high at curbs
Multiple overlay layers have raised the surface above curb height, causing drainage problems.
Severe rutting
Heavy traffic has worn grooves into the asphalt surface that collect water.
Pre-overlay preparation
The existing surface needs to come down before a new layer can go on properly.
Uneven transitions
Height differences between sections create trip hazards and drainage issues.
How We Handle Asphalt Milling in Saint Joseph
Depth Assessment
We determine the right milling depth for your Saint Joseph lot based on surface condition and overlay plans.
Cold Planing
Our milling machine removes the asphalt surface to the specified depth with precision.
Base Inspection
We inspect the exposed base for soft spots or failures that need addressing.
Cleanup & Prep
Millings are hauled off for recycling and the surface is swept clean for overlay.
Get a Free Asphalt Milling Estimate in Saint Joseph
Stop putting it off. The longer pavement problems sit, the more expensive they get. Call Platinum Paving at (913) 701-6044 or fill out the form below for a free, no-pressure estimate on your Saint Joseph, MO asphalt milling project. We respond within 24 hours.
Request Your Free Asphalt Milling Estimate
Tell us about your Saint Joseph project and we'll get back to you within 24 hours.
Asphalt Milling in Saint Joseph — FAQs
Does Platinum Paving serve Saint Joseph, MO?
Yes. Platinum Paving serves all of Saint Joseph, MO and the surrounding area from our office in Kansas City, KS. We have completed projects throughout the Saint Joseph area and across the KC metro since 2019.
How do I get a free asphalt milling estimate in Saint Joseph?
Call (913) 701-6044 or fill out the form on this page. We will schedule a free on-site assessment at your Saint Joseph property, evaluate the work needed, and provide a detailed written estimate — typically within a few business days.
How long does milling take for a Saint Joseph parking lot?
Most commercial parking lots can be milled in a single day. The milling is usually just one part of a larger overlay project — the timeline for the full project depends on lot size and scope.
What happens to the milled asphalt from my Saint Joseph lot?
All millings are hauled away for recycling. Reclaimed asphalt pavement (RAP) is one of the most recycled materials in America — it gets reused in new asphalt mix and aggregate base.
Asphalt Milling in Nearby Cities
Ready for Asphalt Milling in Saint Joseph?
Platinum Paving has completed 530+ projects across the KC metro. One call handles it all — from the first estimate to the final walkthrough. Every job backed by our 1-year warranty.